Nussbaum UNI-LIFT 6500, Operating Instruction And Documentation

Page: 44 / 62

Opera ting instruction a nd documenta tion
UNI-LIFT 6500 - 8000
UNI LIFT 6500 - 8000 - 44 - Version 1.0
8. Security check
The security check is necessary to guarantee the reliability of the automotive lift. It
needs to be performed:
Before the initial operation after installation
Use the form “First security check before initiation”
In regular intervals after the initial operation, at least annually.
Use the form “Regular security check at least annually”
Every time the construction of the lift has been changed.
Use the form “Extraordinary security check”
The first and the regular security check must be performed by a competent
person. It is recommended to perform a maintenance work at the same time.
After the construction of the lift has been changed (i.e. changing the lifting
height or capacity) and after serious maintenance works (i.e. welding on
carrying parts), an extraordinary security check must be performed by an expert.
This manual contains forms with a schedule for the security checks. Please fill out the
adequate form for the different security checks. The form should remain in this manual
after they have been filled out.
9. Installation and Initiation
9.1 Regulations for the installation
• The installation of the lift is performed by trained technicians of the manufacturer or its
distribution partner. If the operator can provide trained mechanics, he can install the lift by
himself. The installation has to be done according to this regulation.
• The standard lift must not be installed in hazardous locations or washing areas.
• Before installation a sufficient foundation must be proved or constructed.
An even installation place has to be provided. The foundations must be based in a frost
resistance depth, both outside and indoors, where you must reckon with frost.
• A standard electrical supply 3~/N+PE, 400 V, 50 Hz must be provided.
The supply line must
be protected with T16A (VDE0100 German regulation). The minimum diameter amounts to
2.5 mm². (Pay attention to the tension of your state)