background image

I

LIMITED WARRANTY

A

Please read this warranty before operating or using your Multichair 4000tx. By operating or using the chair, you

agree to the terms of this warranty. If you do not agree, return the chair to Nuprodx, Inc. and you will receive a full
refund of the price you paid.

WARRANTY: Nuprodx, Inc. warrants this product against defects in material and workmanship as follows: There

is a 30-day conditional money-back warranty. During that period the chair can be returned for a full refund minus a
20% restocking charge. After that period, there is a three-year limited warranty for all parts except cushions.
Because of the fragile nature of the foam, there is no warranty for the cushions.

The warranty period begins on the date you receive the chair. For warranty service, please contact Nuprodx, Inc.

no later than one month following the applicable warranty term. The chair will be repaired or replaced at the discre-
tion of Nuprodx, Inc. with no charges to you for parts and labor, provided you have proof of purchase and of pur-
chase date.

Please do not return the chair to Nuprodx, Inc. without the advance authorization of Nuprodx. Freight charges to

the factory are at your expense, unless otherwise authorized by Nuprodx, Inc.

DISCLAIMER: Except for the above warranty, and the acknowledgement by Nuprodx, Inc. that the chair, as man-

ufactured by it, is fit for the general purpose for which most persons acquire a chair of its kind, Nuprodx, Inc. pro-
vides that you accept the chair as is, without warranties, either express or implied. Nuprodx, Inc. makes no warranty
of fitness for your particular purpose and no warranty of merchantability beyond that already stated. No warranties
extend beyond the duration of the express warranty stated above.

WARRANTY LIMITATIONS AND EXCLUSIONS: The only obligation of Nuprodx, Inc. is to provide the purchaser

with free repair and replacement as described above. This exclusive warranty remedy will not have failed as long as
Nuprodx, Inc. is willing and able to repair or replace as described, but if this remedy should be held to have failed,
the only remaining warranty obligation of Nuprodx, Inc. shall be to refund the acts beyond the control of Nuprodx, Inc.

This warranty gives you specific legal rights, and you may have other rights that may vary from state to state.

This warranty does not apply to problems arising from normal wear, improper operation, improper maintenance,

improper storage or similar disclaimer of implied warranties, and some do not allow limitations on how long an
implied warranty may last. Some do not allow exclusion or limitation of incidental or consequential damages. So the
above limitations or exclusions may not apply to you. 

1) Cantilever side arms: adjust up/down/in/out by slightly

loosening the bolts on the inside face of the clamp attached to
the backrest posts - make the adjustment and retighten.

2) Unlocking the arms (for transfer access) by pressing

rearward on the front edge and pulling up.

2

OPERATING INSTRUCTIONS:

A

Leg Adjustment: When you adjust the legs, make sure that the brass

buttons are fully seated in the legs. Note: if you push too hard the but-
ton could become stuck inside the inner leg; pop out the black end cap
to fix this.

B

Lock the brakes on the casters by pushing down on the textured

rear-most part of the caster brake levers.  Release the brakes on the
casters by pushing down on the front textured part of the caster brake
levers.

Seat cushion: The cushion is quality closed-cell foam, designed to

provide comfort and protection. Make sure that you don't pack anything
on top of it - like the back assembly, arm rests, or any tools. Because it
doesn't have air bubbles, the foam will not spring back after being
compressed for a long time: for example on an airplane trip.  Any dents
in the foam will not spring back and are permanent.

D

Periodically check the tightness of all bolts and apply light oil to the

threads of the bolts.

Summary of Contents for MULTICHAIR 4000tx







Reviews: