E
Turn the chair right side up and install the backrest assembly.
Slide the two backposts into the back of the seat frame and tight-
en the two socket head cap screws using the ¼" Allen wrench
(Refer to Figures 4 & 5). Also tighten the four button head cap-
screws that attach the back cushion to the back posts using the
5/32” Allen wrench (Refer to Figure 6).
F
Refer to figure 8 for a close-up of the multiCHAIR 4200 back-
est assembly. Also note figure 9 and 10 show close-up views of
backrest connections
G
Install the swing-away footrests by sliding the gooseneck tub-
ing/foot paddle into the clamp that is attached to the front legs
(Refer to Figure 7).
mounting screw
slot in bracket
saddle washer
semi-circle
Figure 4
Figure 7
SAFETY PRECAUTION!
Both backrest posts must be completely engaged with the seat
frame and securely tightened. If they are not fitted correctly, there
is a risk of the posts dislodging from the seat frame. This could
cause serious injury or even death!
Figure 5
Figure 6
Figure 9
Figure 8
(close up of the multiCHAIR 4200)
Figure 10
