6.
INSTRUCTIONS FOR USE
6.1 INTRODUCTION
This appliance can make very precise doses as it refers to grinding time.
It is furthermore necessary to set up the appliance before operating, by determining first of
all the coffee blend type (more roasted or less) and the degree of grinding. Grinding time is
then set for each dose key by weighting the grinding product.
• After having plugged the appliance in, push the tab
(8)
at the bottom of the coffee bean
container (7) to close it
(see
Fig. 4).
• Remove the cover
(6)
from the container
(7)
and fill it with coffee beans.
• Press the power ON button
(12)
that must light.
• Pull the tab
(8)
permitting passage of coffee beans.
• Place the filter holder onto the fork
(11)
to dispense the ground coffee from the corre
sponding funnel
(10).
Select the single or double dose through the corresponding keys
(3)
or
(5)
. Dispensing stops once the preset time has elapsed.
6.2 GRINDING SETTING
Set grinding by means of the adjusting knob
(9),
by rotating it clockwise to make powder
finer or anticlockwise to increase the size of its grain as shown on the knob
(see Fig. 5).
Setting is stepless; it is to be gradually performed, by grinding some coffee every two
notches maximum.
When knob is rotated of a turn with stationary motor, the appliance may stop.
6.3 SPOUT ORIENTATION ADJUSTMENT DISPENSING
• According to filter holder used, adjust height of the fork
(12)
in order to permit a correct
coffee dispensing.
6.4 APPLIANCE SETTING
Display indicator legend
(see Fig. 6)
13
Dispensing time of preset 1 coffee dose
14
Continuous dispensing enabled
15
Dispensing time of preset 2 coffee dose
16
Dispensing visualization of 1 coffee dose
10
17
Counter of dispensed 1 coffee dose
18
Padlock (locked programming)
19
Dispensing visualization of 2 coffee dose
20
Counter of dispensed 2 coffee doses
®
PRECAUTIONS AND SAFETY FEATURES®
Machine design has taken into account all reasonable user safety precau
tions; nevertheless, particular conditions of installation and/or handling
may create unforeseen situations beyond the installer's control which will
require case-by-case evaluation of residual risks.
We recommend keeping the following in mind:
• Always handle the machine with care to avoid the danger of its falling.
• The packing materials (carton, cellophane, staples, polystyrene, etc .. ) can
cut, wound or create hazards if used improperly or handled carelessly.
Store such materials out of reach of children and irresponsible persons.
• This symbol on the appliance or package means that the appli-
ance must not be considered as normal household refuse but
¾
that it must instead be delivered to an appropriate collection
centre for the recycling of electric and electronic appliances.
Make sure that this appliance is disposed of correctly and
you too will be making your contribution to the prevention of
negative effects on health and the environment, which could
otherwise be caused by inadequate disposal. Recycling materials helps
to preserve our natural resources. For more information about how to
recycle this product, you can contact your local council office, local refuse
disposal service or the retailer from whom you purchased the appliance.
• Before carrying out any installation or adjustment process, be sure to
have read and thoroughly understood the warnings in this manual.
• The company cannot be held liable for any damage to people or property
resulting from failure to respect the instructions concerning safety, instal
lation and maintenance contained in this manual.
• The power cord of this appliance must never be replaced by the user. In
case of damage, switch the appliance off and contact only the manufacturer
or related after-sales service, otherwise a skilled personnel for replacement.
• Should you decide to no longer use
,
this type of appliance, we recom
mend that you make it inoperative: u
r/
plug
·
the appliance from the mains
socket and cut off the power cord.
.
':
• All defects and/or anomalous machine behaviour should be reported
immediately to authorized installation and/or maintenance personnel.·
• Before connecting the machine, check that electrical power supply cor
responds to the specifications on the data plate.
• In case of incompatibility between the plug and the socket, have the plug
replaced with a suitable type by the manufacturer, his after-sales service,
or by skilled personnel, who should also check that the section of the plug
wires is suitable for the power absorbed by the appliance.
• Avoid use of multiple-plug adapters and extension cords.
• The ground wire must be connected; the electrical system must meet the
standards set by local safety laws and regulations.
• The machine must be installed only by authorized, qualified personnel.
• Check that the machine components have suffered no damage during
shipping; in the case defects or anomalies are found, interrupt installation
and request replacement.
V
