3
2
IN
S
TA
LL
A
TION
IN
S
TA
LL
A
TION
Vehicle Belt
(if used)
must always be secure
and pulled tight.
See pages 9 –11
Carry Handle
must always be locked
into position.
Tether Strap
must always be used when the
restraint is installed in a vehicle.
Store end of tether in bag.
See page 20 - 22
Base Recline Adjustment
base must be reclined correctly
See pages 7 & 8
Secure Latching
restraint must be
securely latched
into base.
See page 18
Read the whole of these instructions carefully and if there is
any doubt about the method of installation, consult the child
restraint manufacturer or agent, or a child restraint fitting
station authorized by the relevant transport authority, or in New
Zealand an agent for the vehicle.
Quick Reference
•
Use the restraint exactly as shown in the instructions.
• Fit the restraint firmly to the car seat.
• A loose harness or restraint is dangerous.
• Destroy the restraint if it has been in a severe crash,
even if no damage is visible.
• Do not alter or modify this restraint.
• Repairs must only be done by the manufacturer or
agent.
• DO NOT USE A REAR FACING CHILD RESTRAINT
WHERE AN AIRBAG IS FITTED IN FRONT OF THE
SEATING POSITION.
• Only use this restraint with the base it was supplied
with. If a second or replacement base is required it
must be a matching model number.
WARNING
NOTE: The warnings on these pages are those
required by the Australian and New Zealand Standard
AS/NZS 1754 for this type of child restraint. Other
warnings specific to this particular child restraint will
be found throughout these instructions.
IMPORTANT: After reading this Quick Reference read the
following instructions carefully.