Nuna CF05702 Instructions For Installation Manual Download Page 15

27

26

IN

S

TA

LL

A

TION

IN

S

TA

LL

A

TION

Use with Strollers

This NUNA

 child restraint can attach to Nuna strollers using 

adapters. Instructions are included with the adapters, which 
are sold separately. 

Please visit www.nuna.com for more information.

Cleaning and Maintenance

Seat Cover

Wash with cold water and mild detergent.
Do not iron.
Do not bleach or dry clean.
Do not twist the soft goods to dry with great force. It may 

leave the seat cover with wrinkles.
Hang dry the seat cover in the shade.

Plastic and Metal Parts

Use only mild detergent, water and a soft cloth to clean the 

car seat shell, handle and harness straps. Air dry. 
Do not use undiluted detergent, or other solvents to clean - 

these may cause damage.

Harness Buckle

To clean the buckle: rinse using warm water. DO NOT use 

any soaps, solvents or lubricants. Using anything other than 

water can cause the buckle to malfunction. Air dry.
When the buckle is operating correctly the tongues will push 

in easily and will CLICK when they latch into place.
If the buckle does not appear to be working correctly get it 

checked or replaced by contacting the retailer from where it 

was purchased.

Harness Straps

Spot clean. If damaged contact the retailer from where the 

restraint was purchased to have them replaced. 

Storage

Remove the child restraint from the vehicle seat if not in use 

for a long period of time. Put the child restraint in a cool, dry 

place and somewhere your child cannot access it.

Summary of Contents for CF05702
















Reviews: