Guide d’utilisation Lunettes Caméra LUN1020 - User’s guide Video camera glasses LUN1020 – indice B
•
Volume down
Press the
« - » button
to decrease the
volume. You can hear « volume down » from the glasses
speaker.
•
Forward
Press longer the
« + » button
to play the next track. You can hear “Forward” from the glasses
speaker.
•
Backward
Press longer the
« - » button
to play the previous track or to return to the beginning in the song.
You can hear “Backward” from the glasses speaker.
Note: The maximum effective distance of the Bluetooth is 10 meters. The effective distance may be
reduced due to interference and blockers… The connection will interrupt when the glasses LUN1020
and mobile phone are out of range.
Summary of settings mode
Desired actions
Press hold/button
LED’s colors
Switch on and
record
Long press for 3-4 seconds on the
on/off button
Red flashing LED
Pause a record
Press for
2 seconds on the
on/off
button
Red steady
LED
Resume a paused
recording
Press for
2 seconds on the
on/off
button
Red flashing LED
Take a picture
Short press
on the
on/off button
Red LED flashing
once
Stop recording video and
turn off
Long
press for 3-4 seconds on the
on/off button
No LED
Switch on the Bluetooth
Long
press
for
7 seconds on the
Bluetooth Button
Blue flashing LED
Switch off the Bluetooth
Press for
3 seconds on
the Bluetooth
button
Blue and red LED
flashing once and
turn
off.
Camera trouble shooting
Problems
Solution
The device seems to be frozen and
doesn’t react when any buttons are
pressed.
This usually occurs if the device receives too many
commands in too short time. To reset the device, press
On/off button for 2-5 seconds. You can also press the
reset button.
The red LED is blinking fast during
10 seconds and the device shut off
automatically.
It occurs when the microSD card is full, please move
your important information to other storage and empty
your current microSD card. Or put an empty card
The red light is steady for 10
seconds and shut off automatically
.
It occurs when no microSD card in the device, please
insert a high speed card microSD card into the device.
Bluetooth trouble shooting
Problems
Solution
The mobile phone can not find the
glasses’s Bluetooth when scanning.
1° Make sure the glasses Bluetooth is switched on.
2° If the glasses Bluetooth is turned on but still
invisible, please turn it off and turn it on again.
The red LED is blinking fast during
10 seconds and the device shut off
automatically.
1° The camera glasses’s Bluetooth is powerlack.
Please charge the device.
2° There’s block between glasses and mobile phone or
the distance between them are beyond the effective
range.
All manuals and user guides at all-guides.com
