Gb - 25
❖
F button: Flash stimulation
Press the «F» button to send a warning to your dog using stimulations transmitted by two contact points
located on the receiver collar for a defined length of time of less than one second.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent red as long as you press the button.
❖
C button: Continuous stimulation
Press the «C» button to send a warning to your dog using stimulations transmitted by two contact points
located on the receiver collar, the duration will be as long as you press the button but
limited to
8 seconds maximum
.
If you press the «C» button for more than 8 seconds, the collar will automatically go into safety mode for
a few seconds before restarting itself normally.
Nota: Beeps can be associated to the stimulation by pressing
first
the “C” button and then the
button.
❖
« Booster » button
Press the Booster button to stop your dog instantaneously. You are able to choose the stimulation
level you think to be the best for an immediate effect. As a result, you do not need to press the « + »
button. Those stimulations are transmitted by two contact points located on the collar for as a long
as you press the button
but not more than 8 seconds max.
If you press the « Booster » button for more than 8 seconds, the collar will automatically go into
safety mode for a few seconds before restarting itself normally.
« Booster » button configuration:
- select the stimulation level 01
- press the ”-“ button until the stimulation level flashes on the LCD screen
- press the ”+“ or ”-“ button to modify the stimulation level
- press the « Booster » button to confirm the level selected
❖
« + » and « - » : control buttons
Use the “+”/”-“ buttons for rapid
adjustment
of the stimulation level of the receiver collar.
15 levels are available.
Level 1: very weak stimulation. Level 15: strong stimulation.
Always start with the lowest level of stimulation.
❖
Retro-lightning of the LCD screen
You can light the LCD screen for approximately 6 seconds by pressing briefly the On/off switch ( )
(approx. 1/2 second).
( (
Summary of Contents for Canicom 500
Page 76: ...print www easyflyer fr...
Page 77: ...www numaxes com Indice B...