Num'axes Canicom 500, User Manual

Page: 25 / 77

Checking/replacing battery of remote control
Performance (radio range) of the remote control may deteriorate as batteries become weak. Be
prepared to replace the battery
.
To check the condition of the battery, turn on the remote control CANICOM 500 and look at the battery
level indicator on the LCD screen. The symbols which appear indicate the following:
Battery fully charged.
Weak battery: prepare to replace the battery.
Dead battery: your CANICOM 500 functions in safety mode and the system locks up.
The battery must be replaced.
NUM’AXES advises to use the same type and same brand of batteries as those supplied in your new
purchased product. Other brands of batteries may not operate, or may not be completely compatible
with your product.
You can purchase the suitable batteries from NUM’AXES or from your distributor.
Remove the old battery and replace it with a new one :
- On the back of the remote control, unscrew the screw and the battery cover.
- Remove the old battery.
- Insert the new battery (3-V lithium CR 2)
paying attention to follow polarity indicated on the battery
housing. (ref. Diagram 6).
- Put the lid back in place.
- Put the top back, using the screw.
- Check the remote control operates correctly.
Gb - 26
Diagram. 6
Replacing battery
of CANICOM 500
WARNING
Make sure the polarity is correct