Numatic TTB 1840G, Original Instructions Manual

Page: 11 / 40

11
T 01460 68600
Machine Set-up Guide
NOTE: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the clean water
tank during the filling process. If using a bucket or similar, ensure it is always clean and free from debris.
The TTB 1840 is equipped with a large 18 litre clean-water tank allowing large areas to be cleaned in a single fill.
The TTB 1840 is equipped with a large 18 litre clean-water tank allowing large areas to be cleaned in a single fill.
Filling the Clean Water Tank
Fill Level Indicator
Water Flow Adjustment
To fill the clean-water tank, remove the filler cap (Fig.1). Fill using a hose, bucket or a suitable container (Fig.2). Use
the fill indicator (Fig.3).
1 2 3
Fill Indicator
A
1 2
B
Showing the clean-water tank full
(Fig.B)
Showing the clean-water tank empty
(Fig.A)
Located on the left of the machine is the On / Off water tap (Fig.1).
Ideally set the tap to 45
0
this enables the cleaning solution to last the same time as a fully-charged battery (Fig.2).