15
T 01460 68600
Machine Operation
To tip the deck into the down position (Operating mode). Press in the brush deck locking pin (Fig.A)
and rotate the brush deck (Fig.B & C). To change to brush deck up position,
(Transit mode) simply lift the deck and the spring loaded locking pin will activate to hold the deck up.
After preparing the floor (see previous
section), we are now ready to set the
controls to suit the cleaning conditions.
Before any settings can be applied,
ensure the brush deck is lowered.
Move the floor tool lever to its
lower position.
NOTE: Do not pull the machine
backwards with the floor tool in the
lowered position, this could possibly
damage the blades.
Raising/Lowering
the Floor Tool
Raising/Lowering the Brush Deck
To start: hold down either trigger and press the yellow On / Off Switch once
Hour meter and battery power.
Water
On
/
Off
Vacuum
On
/
Off
Setting the Cleaning Controls
o
o
A
B
C
Summary of Contents for HBG 3045
Page 55: ...55 T 01460 68600 EU Declaration of Conformity ...
Page 57: ...57 T 01460 68600 Notes ...
Page 58: ...58 T 01460 68600 Notes ...
Page 59: ...59 T 01460 68600 Notes ...
