Numark TT250 USB, User Manual

Page: 3 / 24

3
User Guide (English)
Introduction
Box Contents
TT250USB Pre-Mounted
Cartridge Hinges
(for dust cover)
Platter 45 RPM Adapter Software Download Card
Slipmat USB Cable User Guide
Counterweight Dust Cover Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit
numark.com .
For additional product support, visit numark.com/support .
Features
Rear Panel
2
1 1
3 4 5
1.
Support Feet: If you want to (slightly) lower or raise the height of your TT250USB, you can
turn the four support feet clockwise or counterclockwise, respectively.
2. RCA Audio Output Cables: Connect these attached cables to the audio inputs of your
mixer, stereo system, etc. Their output signal is line-level, so connect it only to line-level
inputs, not phono-level.
Please note: You can still copy records to your computer (via the USB port ) even if these
cables are not connected to a stereo system. You can also listen to your records through
your computer as long as you have configured your computer’s sound input and output
options correctly.
Warning: You may damage your receiver if you plug in line-level output into a phono-level input.
3. Power Cable: Connect this attached power cable to a power outlet after making all of
your other audio connections.
4. Remote Start Input: Use connect a 1/8” (3.5 mm) cable to connect this input to the
remote start output of a compatible mixer. While connected, TT250USB’s platter will start
rotating when the mixer’s crossfader moves towards that side.
5. USB Port: Use the included USB cable to connect this USB port to your computer. You
can listen to your records through your computer as long as you have configured your
computer’s sound input and output options correctly.