
6
Playback Controls
20.
Platter:
Controls the playhead in the software.
21.
Play / Pause:
This button pauses or resumes playback.
Press and hold
Shift
and then press this button to "stutter-play" the track from the last
set Cue Point.
22.
Cue:
When the Deck is paused, you can set a Temporary Cue Point by moving the
platter
to place the playhead at the desired location and then pressing the
Cue Button
.
During playback, you can press the
Cue Button
to return the track to this Temporary Cue
Point. (If you did not set a Temporary Cue Point, then it will return to the beginning of the
track.)
If the Deck is paused, you can press and hold the
Cue Button
to play the track from the
Temporary Cue Point. Releasing the
Cue Button
will return the track to the Temporary
Cue Point and pause it. To continue playback without returning to the Temporary Cue
Point, press and hold the
Cue Button
, then press and hold the
Play Button
, and then
release both buttons.
Press and hold
Shift
and then press this button to return to the beginning of the track.
23.
Sync:
Press this button to automatically match the corresponding Deck's tempo with the
opposite Deck's tempo and phase. Press and hold
Shift
and press this button to
deactivate Sync.
24.
Bleep / Reverse:
Reverses audio playback of the track on the corresponding deck.
Bleep:
The playback of the track will be reversed. Press this button again to resume
normal playback from where it would have been if you had never engaged the Bleep
function (i.e., as if the track had been playing forward the whole time).
Reverse:
The playback of the track will be reversed. Press and hold
Shift
and press this
button again to resume normal playback from wherever the playhead stops.
25.
Scratch:
Press this button to activate or deactivate Scratch Mode. In this mode, you can
touch the center part of the
platter
will scratch like a turntable when you spin it. If
Scratch Mode is off, the center part of the
platter
will pitch-bend when you spin it.
26.
Slip Mode:
Press this button to enable or disable Slip Mode. In Slip Mode, you can jump
to Hot Cue Points, trigger Loop Rolls, or use the
platters
, while the track's timeline
continues. In other words, when you stop the action, the track will resume normal
playback from where it would have been if you had never done anything (i.e., as if the
track had been playing forward the whole time).