1
BOX CONTENTS
NSFX
2 bumpers
4 screws
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to
http://www.numark.com
to register your NSFX. Registering your product ensures that we can
keep you up-to-date with any new product developments and provide you with world-class technical support,
should you run into any problems.
GETTING STARTED
To get started using your new NSFX with NS7:
1.
Visit
www.serato.com/downloads/itch/numark-nsfx
and download
the latest version of Serato Itch with built-in effects!
2.
Assemble NSFX (see ASSEMBLY INSTRUCTIONS below).
3.
Connect NS7 to your computer.
4.
Connect NSFX to your computer.
5.
Open the latest version of Serato Itch!
ASSEMBLY INSTRUCTIONS
1.
With the prongs of your
NS7's laptop stand
removed from the main
piece, use a Phillips-
head screwdriver to
remove the two large
screws and bumpers
from each prong.
2.
Replace the original
bumpers and screws with
the new ones included
with the NSFX.
Note:
Use only the
screws included with the
NSFX to secure the new
bumpers. (They are
smaller than the original
ones.)
3.
Insert the prongs into the
slots of the main bracket
of the laptop stand. Do
not use the original
thumb screws that were included with the laptop stand.
4.
Place NSFX on top of the main bracket of the laptop stand, inserting the thumb screws of the NSFX
into the holes in the bracket. Tighten the screws to secure NSFX to the laptop stand.
5.
Connect the NSFX's attached USB cable to a free USB port on your computer.
IMPORTANT:
Before connecting NSFX to your computer, visit
www.serato.com/downloads/itch/numark-nsfx
to download the latest version of Serato ITCH.
1
2
3
4
Note:
In order to use your
NSFX, you will need two
free USB ports on your
computer – one for NS7,
one for NSFX.
