12
Tips For Using USB Devices With Your MIXDECK
•
When disconnecting a USB device from the MIXDECK, always make sure to use the SOURCE button to switch to
CD/MP3 Mode before disconnecting. Make sure that the letters "HD" are not blinking on the display when disconnecting
a USB device.
•
Disconnecting a USB device while the MIXDECK is in USB MASTER Mode could possibly cause data on the USB
device to become corrupted and unreadable.
•
Note: There is a limit of 999 songs per folder or playlist. Use multiple folders or playlists to separate large numbers of
songs.
•
We do not recommend using MP3 files over 300MB as this may affect the performace of the MIXDECK.
•
For large capacity HD, the MIXDECK can read a maximum of 9 disc partitions. Each partition is limited to 999 folders,
and each folder is limited to 999 songs.
USB MIDI MODE
You can also connect the MIXDECK to a computer via USB to use the
MIXDECK's CD decks as controllers for software programs that are
compliant with USB MIDI protocol. Check with your software
manufacturer to find out if your software supports a USB MIDI controller.
Note:
The mixer and iPod controls do not have any MIDI function.
To activate USB MIDI mode, connect a USB cable from the MIXDECK USB SLAVE connector to a USB port on your computer.
Then press SOURCE and turn the parameter knob to select "USB-MIDI."
MIXDECK FIRMWARE / SOFTWARE
MIXDECK works best with the latest firmware and software installed. We strongly recommend that you check for updates right
away, and continue to check regularly so you don't miss out on any of the good stuff! Visit
www.numark.com
for the latest
updates.
Note:
Before connecting MIXDECK to your
computer, insert the included CD into your
computer to install the necessary drivers.
Summary of Contents for MIXDECK
Page 2: ......
