4
FRONT PANEL FEATURES
1.
DJ Mic 1: This section has the gain
and tone controls for the ¼”/XLR
combination mic input.
2.
Mic 2: This section has the gain and
tone controls for Mic 2
3.
Mic 3: This section has the gain and
tone controls for Mic 3
4.
Mic 2&3 Echo: This knob controls the
echo effect amount on microphones 2
and 3.
5.
Mic 2&3 Delay: This knob controls the
delay time of the echo effect on
microphones 2 and 3
6.
Line Faders: Control volume levels in
the mix.
7.
Master Fader - Controls the overall
output level.
8.
Input toggle switch - Selects which
source will be live to that channel based
on what you have connected to the rear
panel input section
9.
Replaceable Crossfader - This slide
fader blends audio between channels 1
and 2. This also switches the video
when using compatible karaoke CD+G
CDs.
Note: The crossfader is user replaceable
in case of failure. Simply unscrew the
two large screws which hold it in place,
lift it out and disconnect it’s cable. Re-
attach the new crossfader and screw
the mounting plate back onto the unit -
you’re back in business!
10.
Fader Start – Activation allows you to
start the CD players from you
crossfader. Travel from left to right will
start the right CD player and pause the
left CD player
11.
LED METER - Indicates the Master
output level.
12.
Stereo/Mono toggle - Changes the
Master output between Mono and
Stereo
13.
Master EQ Bass
14.
Master EQ Middle
15.
Master EQ Treble
16.
Channel Cue Selector - Used to route
channel audio to your headphones.
17.
Headphone Level – Adjusts cue
volume.
18. Headphone Jacks – Used to connect
either 1/8” or 1/4” plugs for audio
monitoring with headphones.
Summary of Contents for KMX01
Page 23: ...23...