background image

CDN-32S

- The Leader in DJ Technology

©1999 Numark Industries

- 2 -

http://www.numark.com

Safety Information and Product Registration

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SAFETY INSTRUCTIONS

1)

 

Read Instructions - All the safety and operating
instructions should be read before this product is
connected and used.

2)

 

Retain Instructions - The safety and operating
instructions should be kept for future reference.

3)

 

Heed Warnings - All warnings on this product and in
these operating instructions should be followed.

4)

 

Follow Instructions - All operating and other
instructions should be followed.

5)

 

Water and Moisture - This product should be kept
away from
direct
contact with
liquids.

6)

 

Heat - Avoid placing this product to close to any high
heat sources such as radiators.

7)

 

Ventilation - The appliance should be situated so
that it’s location or position does not interfere with
it’s proper ventilation.  For example, the appliance
should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation opening; or,
placed in a built-
installation, such as
bookcase or cabinet
that may impede the
flow of air through
the ventilation
openings.

8)

 

Power Sources - This product should be connected
to a power supply only of the type described in these
operating instructions, or as marked on the unit.

9)

 

Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked
upon or pinched by items placed on or against them.
When removing the cord from a power outlet, be
sure to remove it
by holding the plug
attachment and
not by pulling on
the cord.

10)

 

Object and Liquid Entry - Take care that objects do
not fall into and that liquids are not spilled into the
inside of the mixer.

11)

 

Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.

12)

 

Non-use Periods – The power cord of the appliance
should be unplugged from the outlet when left
unused for long periods of time.

13)

 

Damage Requiring Service - only qualified personnel
should service this product.  If you have any
questions about
service please contact
Numark at the
number(s) shown on
the back cover of this
manual.

14)

 

Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means
built into the CD player is not defeated.

15)

 

Internal/External Voltage Selectors - Internal or
external voltage selector switches, if any, should
only be reset and re-equipped with a proper plug for
alternative voltage by a qualified service technician.
Do not attempt to alter this yourself.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE ANY COVER.  NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the

equilateral triangle is intended to alert the user to the

presence of un-insulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN  MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS (POLARIZED) PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

Summary of Contents for CDN-32S

















Reviews: