background image

CDN-32S

- The Leader in DJ Technology

©1999 Numark Industries

- 6 -

http://www.numark.com

DESCRIPTION OF ANTI-SHOCK BUFFER MEMORY

  The CDN-32S is equipped with a total of 24 Seconds of RAM Buffer memory.

12 Seconds of this is used for the Anti-Shock Buffer and the other 12 are used for
instant start functions.   Anti-shock is to allows the unit to be bumped around hard for 6
seconds per side and not stop.   When the CD is first placed in the tray and a track is
selected, the CD player quickly reads the beginning of the track and stores it into a
buffer memory, the same way a computer stores information in RAM.  This initial
operation takes about 5 seconds.   As you play the track, the CD Player continues to
read ahead of the music and stores this information in the buffer.    If the unit is
bumped the CD Player will continue to play from this buffer until the unit recovers and
can start filling the buffer again.  The buffer should be long enough to allow recovery
from most situations, however, continual shocks can erase the buffer memory.  If the
unit should ever run out of buffer and still be receiving shocks, then the last 2 seconds
will repeat until continuation can occur.  The music never stops.

NOTE:  The CD player can not store buffer information during the setting of a cue

point with the jog wheel.  If you start a CD without giving it an opportunity to load the
buffer it will still start instantly and load buffer slowly.  It will recover 1 second of buffer
for every 6 seconds of music played at 0% pitch.

Summary of Contents for CDN-32S

















Reviews: