![NUK Smart Control Multi 310 Operating Instructions Manual Download Page 36](http://html.mh-extra.com/html/nuk/smart-control-multi-310/smart-control-multi-310_operating-instructions-manual_1716640036.webp)
34
A menu opens:
7. Use the slide controllers to select the
volume of the noises and "Trigger
Duration".
8. Confirm your entries with
OK
.
7.2.5 Adjusting the night light
This menu item is not available via the
internet.
In this menu item, you can select from a
variety of settings.
1. Switch on the night light by setting the
"Night light" switch to
ON
.
As soon as the night light is switched on,
the colours available are displayed.
2. Select the desired colour using the slide
controller.
3. Set "Breathing light" to
ON
if you want to
have a flashing blue light.
The switch for "Night light" automatically
goes to
OFF
.
4. Under "Timer", select a time between 5
and 30 minutes after which the night light
will automatically switch off again.
7.2.6 MP3 upload
This menu item is not available via the
internet.
Use this menu item to load an MP3 file
(max. 5 MB) onto the baby monitor.
Use the music button
then to play
the track.
There does not need to be any
connection between the baby monitor and
the smartphone while this track is playing.
This track is only saved temporarily. As soon
as the power supply to the baby monitor is
interrupted, the track will be lost and the
default song will be played.
7.2.7 Resetting the baby monitor to
default settings
In this menu, you can reset all settings to
factory settings. The SSID name and the
password are reset to factory settings.
It may be that the camera then has to be re-
registered.
This menu item is not available if the
smartphone and the baby monitor are
connected via the internet.
• To reset the camera, keep Reset
depressed for at least
10 seconds.