Step 3: Top and Base Panels
•
Place top onto the base
and beam structure. Center top using the “L” shape marks on the
underside of the top as a guide. Pre-drill holes corresponding to the top attachment brackets.
•
Attach base and beam structure to top using #12 x 1” wood screws
provided.
•
The base panels are designed to bend into place. Place on side of the panel into panel
retention rail and flex panel positioning the opposite side into the opposite rail.
–
Make sure the shorter panel is on the inside and the taller panel is on the outside. The
curved end should be oriented towards the floor to allow wire passage if needed.
