nuConnect trX
7
07/2020 EN
General Connection Instructions
• Only insert the USB plug of the power supply cable into USB connectors of intended de-
vices such as computers or USB power supplies! Make sure that the device receives 5 V
DC from the power source! Do not connect the device to any other power sources!
• Make sure that all connections have been made correctly and that all plugs are firmly
seated in the connectors before connecting the device to the power source.
• Disconnect the power-source before changing any cable-connections
• If you want to disconnect connections on the device, always pull the plug, never at the
cable!
• Use only the intended cables and connectors! Failure to do so may result in damage or
malfunction.
• If the device is not used, or is unsupervised, for a longer period of time, disconnect the
power source by disconnecting the power cable at either device or power source!!
• Only use cables and accessories recommended by Nubert!
Care and cleaning tips
Caution!
• Improper handling of the device may result in damage.
• Always disconnect the power supply from the mains before cleaning the device!
• Never use strong cleaning agents or solvents such as petrol, spirit or similar!
• Before recommissioning, make sure that all connections are correct, that there are no
short circuits and that the device and power supply is completely dry.
Service
If you have any questions or problems during the commissioning of your Nubert system,
please do not hesitate to contact our service team:
•
Phone:
0049 7171 8712-0
•
E-mail:
• Please keep your customer number ready!
