nuConnect trX
19
07/2020 EN
– room-correction software of the AVR.
– The speakers, connected via the trX, need to be set at a relatively high volume. This
is normal and does not impact performance.
Connecting your TV wirelessly to a nuConnect ampX
Devices
Transmitter: nuConnect trX connected to the
(examples)
optical output of your TV
Receiver:
nuConnect ampX
You can transmit the sound from your TV to your nuConnect ampX using the trX.
• Connect the trX to the optical output of your TV and configure it as a transmitter
(optical in,
pink LED) and pair it with the ampX.
Note:
– The ampX must configured as
wls slave
.
– A direct connection to nuPro X speakers is not recommended, as these do not
provide control functions in slave mode.
Connecting your PC wirelessly to a Nubert X-series Soundbase
Devices
Transmitter: nuConnect trX connected to the USB port of a PC
(examples)
Receiver:
nuPro XS-7500
You can use the trX to play the music stored on your PC on your Soundbase.
• Connect the trX to a USB port on your PC.
• Configure the nuConnect trX as the transmitter (USB-DAC,
white LED) and
pair it with your Soundbase (
setup / wls slave
). You can still use and operate your
Soundbase normally. To listen to music from your PC, select the
wireless input
on the Soundbase.
Note:
Instead of the Soundbase, you can connect and use the nuConnect ampX in the
same way.
