•
Press
[TALKS],[Key 2]
twice rapidly to view the network indicator, in the upper left corner.
To magnify items in the upper part of the screen (such as tabs, the case indicator, or application
icons):
•
Press
[TALKS],[Long Key 2]
Note:
This key sequence usually applies to functions that are relevant to the active application rather than
the entire phone application.
To magnify the title of the window:
•
Press
[TALKS],[Select]
.
To magnify the line of text where the cursor is:
•
Press
[TALKS],[Left]
.
To magnify the currently selected object:
•
Press
[TALKS],[Up]
.
6.3 Magnification settings
This section describes the various options that you can select to customize the ZOOMS magnification
feature to your needs. To change any of these settings, open the
TALKS&ZOOMS Settings
dialog box
and select the
Magnification
tab.
6.3.1
Screen mode
The
Screen mode
setting determines how the screen is divided when magnification is active. You have
two options:
•
Full screen
: ZOOMS uses the entire screen area to display a magnified version of one subsection
of the active window.
•
Distributed views
: The screen is divided into four parts: a large section at the center; a smaller
section at the top, showing the title of the window at twice its normal size; and two small sections
at the lower end of the screen, which show the soft keys at twice their normal size. The
Distributed views
option is intended mainly for use at low zoom factors (see section 6.3.2), and
it keeps important information visible just as the un-magnified screen would.
To switch the Screen mode setting:
•
Press [
TALKS],[*]
.
6.3.2
Zoom factor
The zoom factor is a measure of magnification—for example, a zoom factor of 200% means that the
display is shown at twice its normal size.
In addition to various degrees of magnification, the
Zoom factor
parameter provides an option called
Auto-fit focus
. If you select this option, the zoom factor changes dynamically to make the text always
appear at a certain height regardless of its size on the original display. The height of the text depends on
what you select for the
Auto-fit focus
parameter (see section 6.3.3).
If you do not want the screen to be magnified but do want to use other
Magnification
tab settings, such
as
Inverted Colors
, set
Zoom factor
to 100%.
To change the degree of magnification:
•
Press
[TALKS], [7]
to zoom out, or
[TALKS], [8]
to zoom in.
41
