4
18. 03. 20. Document Number 671051
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
XS WA
Installation Manual
Remove temporary cross brace when cement
has dried. Fit the outer grille (note grille blades
sloping down to shed water).
Spacer
Wall
Fixing
Plate
Interior
Grille
Outside
Grille
Fit the inside grille to the fanplate, locating grille
over the top lip before engaging screws.
11
14
15
16
17
12
13
Removing Electrical Cover
Fitting Inner Grille
Fitting Outer Grille
Thin Wall Installation
Weather Terminal Installation
Bringing Cable Through Fan Plate
Assembling Fan
Release the electrical cover from the fan plate.
Bring the cable through the fan plate.
Assemble the fan plate to the inside sleeve.
IMPORTANT
During shutter operation of XS fans there will be a short delay on
start-up and shut down of approximately 40 seconds, this is normal.
3.1 Installing Ancillaries (Also see Section
X
)
3.1.1 Thin Wall
This thin wall application is best covered using a Window Kit. Drawing
shows a Wall Fixing Plate fixed to the aperture by screws. The Window
Kit clamps together either side of the Wall Fixing Plate.
3.1.2 Weather Terminal
This thin wall application is best covered using a Window Kit. Drawing
shows a Wall Fixing Plate fixed to the aperture by screws. The Window
Kit clamps together either side of the Wall Fixing Plate.
