2
18. 03. 20. Document Number 671051
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
XS WA
Installation Manual
1.2 Important Information
This manual contains important information on the safe and
appropriate assembly, transport, commissioning, operation,
maintenance, disassembly and simple troubleshooting of the product.
While the product has been manufactured according to the accepted
rules of current technology, there is still a danger of personal injury or
damage to equipment if the following general safety instructions and
the warnings contained in these instructions are not complied with.
•
Read these instructions completely and thoroughly before
working with the product.
•
Keep these instructions in a location where they are accessible
to all users at all times.
•
Always include the operating instructions when you pass the
product on to third parties.
1.3 Personal Protective Equipment
The following minimum Personal Protective Equipment (PPE) is
recommended when interacting with Nuaire product:
•
Protective Steel Toed Shoes -
when handling heavy objects.
•
Full Finger Gloves (Marigold PU800 or equivalent) -
when
handling sheet metal components.
•
Semi Fingerless Gloves (Marigold PU3000 3DO or equivalent)
- when conducting light work on the unit requiring tactile
dexterity.
•
Safety Glasses
- when conducting any cleaning/cutting operation
or exchanging filters.
•
Reusable Half Mask Respirators
- when replacing filters which
have been in contact with normal room or environmental air.
Nuaire would always recommend a site specific risk assessment by a
competent person to determine if any additional PPE is required.
2.0 INTRODUCTION
The XS Wall Fan Kit is available in 6, 9 and 12 inch impeller sizes
suitable for supply or extract and can be the heart of a room’s
automatic ventilation system.
Ensure adequate air replacement for the fan and any fuel burning
appliance in the room.
2.1 Switching
Operated via a separately wired 3 amp fused spur (by others) or
operated via the optional XS-MFC remote controller allowing supply or
extract, variable speed and automatic or manual switching of several
fans if desired.
2.2 Sensors
Sensors are available as remote units or integral ‘plug in’ units. They
are able to control multiple fans, depending on sensor and fan types.
Integral sensors are quick and easy to install and are aesthetically
pleasing, whilst remote sensors give the benefit of location close to
the pollutant source. Remote sensors can be fitted with an optional
security strap to prevent unwanted tampering.
2.3 General
The removable interior grille provides easy access while the external
rotor motor makes for simple removal of the push-on impeller for
cleaning. Upward angled interior grille vanes shield workings from
view and downward sloping external vanes throw off rain. The fan is
IP24 splash proof approved with the motor rated at IP44. All external
components are made in soft grey colours from ultra violet stable
ABS material so they will blend with most decors and will not fade in
sunlight.
2.4 Unit Codes
Unit Codes* Operation Type
XS6WA
6” Wall Fan with External and Internal Grilles and
Wall Sleeve. 230V 50Hz.
XS9WA
9” Wall Fan with External and Internal Grilles and
Wall Sleeve. 230V 50Hz.
XS12WA
12” Wall Fan with External and Internal Grilles and
Wall Sleeve. 230V 50Hz.
XS6WAH
6” Wall Fan with External and Internal Grilles and
Wall Sleeve. 220V 60Hz.
XS9WAH
9” Wall Fan with External and Internal Grilles and
Wall Sleeve. 220V 60Hz.
XS12WAH
12” Wall Fan with External and Internal Grilles and
Wall Sleeve. 220V 60Hz.
2.5 Dimensions (mm)
Outer grille
Wall sleeve
Fan assembly
Inside grille
269 mm
134 mm*
269mm
137 mm*
128mm
272mm
XS6WA (6 inch)
Front View
XS9WA (9 inch)
XS12WA (12 inch)
Side View
Rear View
Cable entry
Aperture required
260 x 260mm sq.
*To centre
of ‘duct’
*To centre
of ‘duct’
*To centre
of ‘duct’
337 mm
171 mm*
342mm
175mm*
130mm
342mm
Cable entry
413mm
206 mm*
420mm
214 mm*
190 mm
420mm
Cable entry
Aperture required
330 x 330mm sq.
Aperture required
410 x 410mm sq.
1
2
Unit Components
Unit Dimensions
*H indicates 220V 60Hz 1ph
Wall Fan Kits are supplied as a complete package with all wall
installation parts included.
