9
23. 03. 21. Document Number 671053
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
XS (FR/PR)
Installation Manual
5.0 ANCILLARIES
5.1 Single Spigot Adaptor
Used in conjunction with flexible ducting systems.
Mounted onto the front of the Spacer section using the 4 off 5mm x
40mm brass screws supplied with the Single Spigot Adaptor. Replaces
the internal grille.
Can also be used connected directly to a Roof Terminal using the 4 off
5mm x 40mm brass screws supplied with the Single Spigot Adaptor.
Manufactured from HIPS material.
46
Single Spigot Adaptor
5.2 Flexible Ducting & Installation Accessories
A full range of ducting and installation accessories is available from
Nuaire. Call Nuaire on 02920 885231 to request literature.
47
Flexible Ducting
6.0 MAINTENANCE
It is important that maintenance checks are recorded and that the
schedule is always adhered to, in all cases, the previous report should
be referred to.
6.1 Routine Maintenance
Periodically, at least once a year or more frequently in case of heavy
use, remove the dirt and encrustation from the grille(s) fan impeller
and motor casing. Ensure the impeller is not cracked or deformed and is
able to rotate freely and without oscillation.
Do not use any solvents to clean this product.
7.0 WARRANTY
The 3 year warranty starts from the day of delivery and includes parts
and labour for the first year. The remaining period covers replacement
parts only.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or not
installed, commissioned and maintained in accordance with the details
contained in this manual and general good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Nuaire International Sales office for
further details.
Failure to maintain the unit as recommended will invalidate the
warranty.
8.0 END-OF-LIFE AND RECYCLING
Where possible Nuaire use components which can be largely recycled
when the product reaches its end-of-life:
•
Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into WEEE recycling streams.
•
Sheet metal parts, aluminium extrusion, heating/cooling coils and
other metallic items can be segregated and fully recycled.
•
EPP, plastic ducting, nylon corner pieces, plastic heat exchangers,
packaging material and other plastic components can be
segregated into mixed plastic and widely recycled.
•
Cardboard packaging, wood, used filters and other paper
components can be largely recycled or fully processed in energy
from waste centres.
•
Remaining Items can be further segregated and processed in
accordance with the zero waste hierarchy. Please call After Sales
Support for further information on items not listed above.
Ensure that Nuaire product is made safe from any electrical / water
/ refrigerant supplies before dismantling commences. This work
should only be undertaken by a qualified person in accordance with
local authority regulations and guidelines, taking into account all
site based risks.
9.0 AFTER SALES AND REPLACEMENT PARTS
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
If ordering spares please quote the serial number of the unit together
with the part number, if the part number is not known please give a full
description of the part required. The serial number will be found on the
identification plate attached to the unit casing.
Telephone 02920 858 400
Technical or commercial considerations may, from time to time,
make it necessary to alter the design, performance and dimensions
of equipment and the right is reserved to make such changes without
prior notice.