8
23. 03. 21. Document Number 671053
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
XS (FR/PR)
Installation Manual
4.6 XS-MFC Remote Control Or Remote Sensors Installation
(Optional)
The XS-MFC Multi Fan Control provides supply or extract, variable
speed and automatic or manual switching of several fans if desired, (see
note below). The control is best mounted approx 1.5m above the floor.
Remote Sensors are available for Humidity, Air Quality and Passive Infra
Red control. Remote Sensors should be positioned at least 1.5m above
the floor and away from direct heat sources e.g. radiators.
Up to 5 fans (size 6 / 9 inch) can be controlled by one XS-MFC.
Up to 2 fans (size 12 inch) can be controlled by one XS-MFC.
Do not mix different fan sizes on the same controller.
39
Remote Control / Sensor Installation - 1
Lift up panel and remove two screws to dismantle unit.
Push out backplate box cable entry using a screwdriver.
40
Remote Control / Sensor Installation - 2
41
Remote Control / Sensor Installation - 3
3
Spot through backplate box and drill and plug the wall.
1.5m
42
Remote Control / Sensor Installation - 4
Fix backplate box to the prepared wall.
43
Remote Control / Sensor Installation - 5
Feed approx. 200mm of supply cable into the box.
200mm
44
Remote Control / Sensor Installation - 6
Connect the end of the cable into the control block.
45
Remote Control / Sensor Installation - 7
7
Fit the control into the backplate box and secure.
Test the installation.