04. 02. 20. Document Number 671712
3
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
SVT28
Installation Manual
4.2 Fitting Unit to Support Bracket
Having fixed the support bracket, the SVT28 unit can now be raised up
into position between the support bracket on the ceiling and attached
when required using the holes through the sides of the bracket and the
unit.
Support bracket
Fix the support bracket through the
available holes in the top to the ceiling
Deflector
Attach SVT2 unit to
the support bracket
positioned on the
ceiling through the 4
side holes each side of
the bracket and unit.
C
B
A
Terminal
Box
55mm
To adjust
deflector
blade (A)
To adjust
deflector
blade (B)
2
3
5
4
Fixing Support Bracket
Fixing Unit to Support Bracket
Unit Dimensions
Adjusting Deflector Blades
4.3 Adjusting Deflector Blades
The Deflector blades are factory set for horizontal discharge (default
setting) but can be adjusted for downward deflection using the
following procedure.
•
1. Adjust top blade (A) by removing the 2 screws at the front,
either side of the blade, tilt down and replace the screws.
•
2. Adjust bottom blade (B) by removing the 2 screws at the back,
either side of the blade, tilt upwards and replace the screws.
5.0 DIMENSIONS
Unit
Code
Dimensions (mm)
A
B
C
SVT28-1
2300
320
700*
SVT28-2
2300
403
700*
*Allow an additional 55mm for the width of terminal box.
