OM0232
|
Rev 7 July/2017
Page 4 of 56
NuAire, Inc.
|
2100 Fernbrook Lane
|
Plymouth, MN 55447
|
U.S.A
|
ph: 763.553.1270
|
fx: 763.553.0459
|
tf: 800.328.3352
|
www.nuaire.com
NUWIND Centrifuge
1.0
General Information
1.1 Description
The NUWIND 2.0 is a laboratory benchtop series of centrifuges that maximizes productivity while minimizing laboratory
required bench space. The centrifuge functionality allows the separation of substances of different densities held in
suspension or emulsion in a liquid using centrifugal force.
The NUWIND 2.0 centrifuge is available in two models, one ventilated and the other refrigerated.
The NU-C200V ventilated model has a unique ventilation system to maximize performance within laboratory ambient
temperature conditions.
The NU-C200R refrigerated model adds precise temperature control to further maximize performance.
The refrigeration system refrigerant used is CFC-free to meet regulations of refrigerant use.
Centrifuges NUWIND 2.0: ventilated and refrigerated models
Intended use
The centrifuge is designed and manufactured for use with rotating accessories supplied by NuAire, Inc. It is suitable for
separating substances of different densities held in suspension, or emulsion in a liquid.
The maximum density of substances should be 1.2 g/ml.
The centrifuge must be used in an optimal state of operation and maintenance. The non-observance of the rule of use may
threaten the health of users or third persons, but it may also cause damages to the unit and/or surrounding equipment.
Users of the equipment must be trained on good centrifugation practices, as well specific usage of the NUWIND models and
Accessories. Any use outside the framework defined above is considered non-compliant.
NuAire, Inc. assumes no responsibility for injury due to improper use.
CAUTION
!
