8
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
28. 01. 20. Document Number 671881
Installation Manual
NOXMASTER
9.0 END-OF-LIFE AND RECYCLING
Where possible Nuaire use components which can be largely recycled
when the product reaches its end-of-life:
•
Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into WEEE recycling streams.
•
Sheet metal parts, aluminium extrusion, heating/cooling coils and
other metallic items can be segregated and fully recycled.
•
EPP, plastic ducting, nylon corner pieces, plastic heat exchangers,
packaging material and other plastic components can be
segregated into mixed plastic and widely recycled.
•
Cardboard packaging, wood, used filters and other paper
components can be largely recycled or fully processed in energy
from waste centres.
•
Remaining items can be further segregated for energy from waste
centres or, as a last resort, sent to landfill. Please call After Sales
Support for further information on items not listed above.
IMPORTANT
Ensure that Nuaire product is made safe from any electrical
/ water / refrigerant supplies before dismantling commences.
This work should only be undertaken by a qualified person in
accordance with local authority regulations and guidelines,
taking into account all site based risks.
10.0 AFTER SALES AND REPLACEMENT PARTS
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
If ordering spares please quote the serial number of the unit together
with the part number, if the part number is not known please give a full
description of the part required. The serial number will be found on the
identification plate attached to the unit casing.
Telephone 02920 858 400
10.1 Replacing the Carbon Filter
Carbon filters are located in Pod A (larger section).
•
Isolate the unit from mains power supply.
•
Unscrew the fixings securing the lid in place and remove lid from
unit (Figure 8).
•
Remove the Carbon filter(s) by lifting vertically.
•
Replace the carbon filter(s), ensuring the airflow direction matches
the air flow of the unit (if applicable).
•
Refit the unit lid.
•
Reconnect the main supply.
•
Wash hands thoroughly after handling the carbon filters.
IMPORTANT
Carbon filters / pellets are not to be ingested
and hands are to be thoroughly washed after handling.
10.2 Replacing Particulate Filter
To ensure effective particulate filtration and low system resistance,
optional air filters must be replaced every 12 months. Replacement
filters are available for purchase direct from Nuaire, with the relevant
part codes shown in this document.
There are two particulate filters per unit, these are located within Pod A
and Pod B.
•
Ensure unit is isolated from mains power supply.
•
Unscrew the fixings securing the lid(s) in place and remove from
unit.
•
Lift out and remove the filter(s).
•
Fit the replacement filter ensuring the airflow direction matches
the air flow of the unit.
•
Refit lid(s) and restore power to the unit.
11.0 WARRANTY
The 5 year warranty starts from the day of delivery and includes parts
and labour for the first year. The remaining period covers replacement
parts only.
This warranty is void if the equipment is modified without
authorisation, is incorrectly applied, misused, disassembled, or not
installed, commissioned and maintained in accordance with the details
contained in this manual and general good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Nuaire International Sales office for
further details.
Failure to maintain the unit as recommended will invalidate the
warranty.
14
15
Filter Removal
Unit Website QR Code
Pre Filter
(PM10 or PM2.5)
Carbon Filters (x2)
Post Filter (ISO COARSE 75%)
https://www.nuaire.co.uk/residential/positive-input-ventilation-piv/noxmaster
