NuAire BOXER B815H Series, Installation, Operation & Maintenance Instructions Manual

Page: 10 / 48

nuaire.co.uk 029 2085 8200
BOXER BPS ECOSMART CLASSIC CONTROL (ES)
nuaire.co.uk 029 2085 8200
5.0 ACCESS TO UNITS
5.1 HINGED OR REMOVABLE ACCESS PANELS
Figure 10: The unit must be installed with at least 600mm clearance from a wall / barrier to gain access from the side. Isolate before removing panels.
In this product range, several unique concepts have been implemented with
a view to simplifying the installation design.
1. The unit must be installed with at least 600mm clearance from a wall/
barrier. With this absolute minimum clearance, the unit may be connected to
the power supply and control connection.
2. With this clearance, unit filters may be changed, and the fans coils, heat
exchanger and condensate tray may be inspected and cleaned if necessary.
3. The LPHW and Electrical heater settings, coil bleed and drain, and all other
control adjustments are similarly accessible.
4. Side access, where possible, is preferred in all cases in terms of safe working
access to the equipment under the CDM regulations.
5. Where these arrangements are not suitable, the Consultant’s and
Contractor’s project specific requirements will always be accommodated
where possible.
All hinged access panels will be lockable and removable via locked hinges which
can be opened for panel removal. All keys are identical and will open any handle
or hinge.
The hinges do not need to be unlocked in normal operation of opening and
closing.
Figure 11: All hinged access panels will be lockable and removable.
Easily removable
blowers for
maintenance
Access to built-in controls
Interchangeable filters
slide in and out
Hinged or removable
access panels
Access to
Plate Heat Exchanger
Access to interchangeable coils, LPHW
heater and chilled water cooling option
8mm outside diameter
condensate drain.
Condensate pump
fitted as standard
(where necessary).