NuAire B815H/ER/AT-L, Installation, Operation & Maintenance Instructions Manual

Page: 7 / 60

05. 11. 20. Leaflet Number 671829
BOXER BPS ECOSMART ADAPT (TREND) CONTROL (AT)
7
3.2 BASE FRAME LIFTING POINTS
When units are constructed of multiple modules each module will have
it’s own individual base frame, which is then connected to the next to
assemble the full system.
All base frame sections will have 50mm square lifting holes at the end of each
side to enable lifting. In addition to this, covered fork lifting channels are located
across the width of the base frame, if the module length is sufficient to allow
this. For shorter modules the fork lifting points will be along the length of the
section, without a covered channel. Please refer to figure 3.
Figure 3: Base Frame Detail
A
A ( 1:5 )
150.0
50.0
51
.5
50
.0
51
.5
100.0
100.0
86
.0
81
.0
Overall Unit Length
Section Length Section Length Section Length
Se
ct
io
n
W
id
th
50
.0
50.0
50mm x 50mm Lifting Hole
IMPORTANT
Only individual modules should be lifted or
manoeuvred.
The units must not be lifted or manoeuvred
pre-assembled.