SETUP INSTRUCTIONS FOR EMOTIVO
Read and Understand the entire Nu-Flame Manual prior to use.
Make certain to inspect the package thoroughly. Carefully remove and unwrap your Nu-Flame
fireplace.
Your fireplace will have the following components:
1.
Fireplace
2.
Burner
3.
Safety Mounting Bracket (3 pieces)
4.
Hardware Bag
5.
Snuffer Tool
You may wish to purchase a funnel for pouring fuel into the burner
Mark on your wall exactly where you wish to
hang the fireplace using the overall height and
width. Once you are satisfied with the
placement make a mark on the wall 8.5” down
from the very top of where you want the
fireplace to be mounted. This is where the
bottom of the horizontal mounting bracket will
sit.
Using a level draw a line horizontally on the
mark you just made.
Take the horizontal mounting
bracket piece (piece with tabs
at top) and place it on the level
line you drew. Mark the holes
with a pencil and remove the
bracket. Using a ¼” drill bit, drill
the holes you just marked. Take
the white plastic anchor and tap
one into each drilled hole using
a hammer. Make certain the
anchor is flush with the wall.
