NTI VOPEX SERIES DVI SPLITTER/EXTENDER
6
VOPEX INSTALLATION
VOPEX-C6DVI(A-LA)-4
Note: VOPEX-C6DVI-4 Video Only Splitter/Extender does not have audio support. If the audio support is not
present, please disregard all audio references.
1.
Make connections between the VOPEX and the audio and video source(s). (See Fig. 1.)
a)
Connect one end of the DVI-IS-3-MM (supplied) to the DVI connector on the video source.
b)
Connect the other end of the DVI-IS-3-MM cable to the DVI female connector marked "DVI Video In" on
the VOPEX.
c)
Connect one 3.5mm stereo plug end of the SA-3-MM cable (supplied) into the 3.5mm female audio
connector marked "line out", "spkr", or "headphones" on the audio source.
Notes:
If all 3 connectors are available, use the connector marked "line out".
The "line out" connector is typically lime green and may be marked with this symbol
The "spkr" connector is typically orange, and may be marked with this symbol
The "headphones" connector may be marked with this symbol
d)
Connect the other 3.5mm stereo plug end of the SA-3-MM cable into the 3.5mm female stereo
audio connector marked "Audio In" on the VOPEX.
Figure 1- Connecting the VOPEX to a video/audio source