NTI VOPEX SERIES DVI SPLITTER/EXTENDER
11
PLUG-IN AND BOOT UP
1.
Plug the power cord from each video device and the power supply for each audio device into a power outlet.
2.
Connect the 24
VDC
2.5A
AC
adapter power connector to the power port on the VOPEX (16-port models have a
country-specific line cord).
No AC adapter is required at the Remote Unit. The Remote Unit will be powered through the CATx cable from the VOPEX.
3. Plug the AC adapter/power cord into a power outlet. The green LED on the VOPEX and the green LED on the RJ45
connector of each XTENDEX Remote Unit should illuminate, indicating that a proper power connection has been made to
them. (See Figure 4)
Figure 6- Connect the AC adapter to a VOPEX
4. Turn ON the audio and video source(s), stereo speakers, and monitors. They should react as if they were directly
connected to each other.
Note: The yellow LED on the RJ45 connector of each XTENDEX Remote Unit will illuminate anytime data traffic is
passing between the VOPEX and the XTENDEX, indicating proper CATX cable connection and communication.
(See Figure 4)