background image

1

INSTALLATION GUIDE FOR

  SUN KEYBOARD & MONITOR SPLITTERS

VOPEX-2KSUN

VOPEX-2KM-SUN

VOPEX-3KSUN

VOPEX-3KM-SUN

INTRODUCTION

This VOPEX unit allows (1) SUN Workstation to support multiple users
(up to 3 – depending on the VOPEX model)

The VOPEX has 3 basic modes of operation:  Instant Auto, Delayed Auto
and User.  Press the mode button on the front panel of the VOPEX to
select the desired mode.  The LED’s on the front panel show which mode
has been selected (see Fig 1).  Only 1 mode can be selected at a time.

WARNING!

 

 DO NOT PRESS THE MODE BUTTON WHILE THE COMPUTER IS BOOTING OR

WHILE AN APPLICATION IS LOADING.

USER MODES

The following is a description of the three available modes.

Instant Auto Mode

Any user can gain immediate access to the computer by pressing a key or moving a mouse.

Delayed Auto Mode

To gain access to the computer, a user need only press a key on the keyboard or move the mouse when the BUSY LED (located on the front
panel of the VOPEX) is not lit.  When the active user’s keyboard and mouse are idle for 5 seconds, the VOPEX releases that port, and the BUSY
LED goes out.  Any user can now gain immediate access to the computer by pressing a key or moving a mouse.

User Mode

The VOPEX has a User Mode for each keyboard port (USER 1, USER 2, etc..).  When a User Mode is selected, then only the user connected to
that port can access the computer.  All other users are locked out until the mode is changed.

MONITOR

All monitors connected to the VOPEX display exactly the same information.  For example, if the user connected to Port 1 is inputting data, then all
users connected to the VOPEX see what the user is entering.

KEYBOARD CONFIGURATION

All keyboards connected to the VOPEX automatically have the same keyboard configuration as the user currently accessing the computer.  For
example, if the user currently accessing the computer changes a status key (such as CAPS LOCK or NUM LOCK), then all keyboards will
immediately be updated.

AVAILABLE OPTIONS

VOPEX models are available that support any combination of the options:

1.   2 or 3 users

2.   13W3 video

3.   60 or 50 Hz and 110 or 220 VAC

MAN032

Revised 10/29/98

NTI

NTI

NETWORK
TECHNOLOGIES
INCORPORATED

Tel:330-562-7070
Fax:330-562-1999

1275 Danner Dr
Aurora, OH 44202

S U N   W O R K S T A T I O N

V O P E X - 2 K M - S U N

Summary of Contents for VOPEX-2KSUN

Page 1: ...conds the VOPEX releases that port and the BUSY LED goes out Any user can now gain immediate access to the computer by pressing a key or moving a mouse User Mode The VOPEX has a User Mode for each keyboard port USER 1 USER 2 etc When a User Mode is selected then only the user connected to that port can access the computer All other users are locked out until the mode is changed MONITOR All monitor...

Page 2: ... Blue 6 Kybd Receive 6 H sync 7 Pwr N 7 Ground 8 5V 8 ID 1 INSTALLATION Connecting the VOPEX to the Computer 1 Turn OFF power to the computer that will be connected to the VOPEX before connecting of disconnecting any cables WARNING YOU MAY DAMAGE YOUR COMPUTER IF YOU DO NOT TURN THE POWER OFF BEFORE CONNECTING OR DISCONNECTING CABLES 2 Connect the computer to the VOPEX as follows see Fig 1 a Conne...

Page 3: ...to AC power outlets 2 Turn OFF power to the monitors that will be connected to the VOPEX before connecting them 3 Connect a monitor to the MONITOR 1 port on the back of the VOPEX see Fig 1 NOTE A MONITOR MUST BE CONNECTED TO THE MONITOR 1 PORT FOR THE MONITOR DEVICE DRIVER TO FUNCTION PROPERLY 4 Connect any other monitors to any of the other MONITOR ports on the back of the VOPEX NOTE ALL MONITORS...

Page 4: ...s not functioning properly then perform the steps in Power down sequence and then the steps in Power up sequence 5 If a monitor is not functioning properly a Verify that a monitor is connected to MONITOR 1 on the rear panel of the VOPEX b Verify that all monitors connected to the VOPEX are the same type all monochrome or all color WARRANTY INFORMATION The warranty period on this product parts and ...

Reviews: