NTI UNIMUX 2-Port USB DVI KVM Switch
1
INTRODUCTION
The UNIMUX-DVI-2 USB DVI KVM switch (UNIMUX) allows one user to access two USB CPUs with only one USB keyboard,
USB mouse, and a DVI video-enabled monitor. Internal microprocessors allow both CPUs to boot simultaneously and error-free.
Port selection is accomplished by a front panel push button or commands typed on the keyboard.
Types of User Input Devices Supported:
•
USB keyboard with Windows
®
layout
•
USB keyboard with SUN layout
•
USB keyboard with MAC layout with mouse
•
USB Mouse - (up to 3 buttons)
•
USB
IntelliMouse
®
(scrollwheel)
•
NTI USB-Sun Adapter
•
USB
Hub
•
Microsoft, Logitech, and Kensington mice/trackballs
Types of CPUs Supported:
Any USB CPU supporting USB version 1.0 or above including:
•
USB
WINxx
•
USB
MAC
•
USB
SUN
Note: UNIMUX-DVI-2 is fully compliant with USB standards (1.0, 1.1)
OPTION:
UNIMUX-DVI-2-
NBSC
– USB DVI KVM switch with no Command, Broadcast, or Scan modes
MATERIALS
Materials Supplied with this kit:
•
NTI UNIMUX-DVI-2 Switch
•
120V at 60Hz-5VDC/0.5A AC Adapter (Domestic Only)
OR
120/240V at 50/60Hz -5VDC/2.0A AC Adapter (Foreign or
Domestic)
•
Line Cord, country specific (only supplied when 120/240V AC adapter is supplied)
Materials Not Supplied, BUT REQUIRED:
A set of 2 cables for each USB CPU being connected to the switch must be used:
•
DVI-IS-xx-MM for monitor interface
•
USB-AB-xM for device (keyboard and mouse) interface.
Legend:
xx
is the length of the cable in feet
M
is an abbreviation for meters
MM
indicates male-to-male connector
Cables can be purchased from Network Technologies Inc by calling
(800) 742-8324
(800-RGB-TECH) in the US and Canada or
(330) 562-7070
(worldwide).
