NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH
8
•
Connecting
audio only
To make an audio connection without changing the current video connection, use any of the following commands:
1.
<OUT>, <
▼
>, <
▼
>, Single digit output port number, <IN> or <ENTER>, Single digit input port number, <ENTER>.
Ex: <OUT> <
▼
> <
▼
> 3 <IN> 5 <ENTER>
2.
<OUT>, <
▼
>, <
▼
>, Double digit output port number, Double digit input port number.
Ex: <OUT> <
▼
> <
▼
> 03 05
All audio outputs can be connected to one audio input by using <*>:
1.
<*>, <
▼
>, <
▼
>, Single digit input port number, <ENTER>
Ex: <*> <
▼
> <
▼
> 5 <ENTER>
2.
<*>, <
▼
>, <
▼
>, Double digit input port number
Ex: <*> <
▼
> <
▼
> 05
•
Connecting video only
To make a video connection without changing the current audio connection, use any of the following commands:
1.
<OUT>, <
▲
>, Single digit output port number, <IN> or <ENTER>, Single digit input port number, <ENTER>.
Ex: <OUT> <
▲
> 3 <IN> 5 <ENTER>
2.
<OUT>, <
▲
>, Double digit output port number, Double digit input port number.
Ex: <OUT> <
▲
> 03 05
All video outputs can be connected to one video input by using <*>:
1.
<*>, <
▲
>, Single digit input port number, <ENTER>
Ex: <*> <
▲
> 5 <ENTER>
2.
<*>, <
▲
>, Double digit input port number
Ex: <*> <
▲
> 05
Volume Control
The volume level can be adjusted on each output port.
•
To increment <
▲
> or decrement <
▼
> the volume, use the following command:
<OUT>, <
▼
>, Double digit output port number, <
▲
> increment or <
▼
> decrement, <ENTER>
Ex 1: <OUT> <
▼
> 03 <
▲
> <
▲
> <
▲
> <ENTER>
This will increment the volume by +6dB (2dB/ press).
Ex 2: <OUT> <
▼
> 14 <
▼
> <
▼
> <ENTER>
This will decrement the volume by -4dB.
•
To Mute, use the command:
<OUT>, <
▼
>, Double digit output port number, the <0> key, <ENTER>
Ex: <OUT> <
▼
> 03 0 <ENTER>
This will mute output 3
•
To Un-mute, use the instruction:
<OUT>, <
▼
>, Double digit output port number, the <1> key, <ENTER>
Ex: <OUT> <
▼
> 03 1 <ENTER>
This will un-mute output 3
Memory Functions
There are 100 memory locations(0-99) available to save connection configurations. Location 0 is the power-ON default).
•
Saving Connections
To save all current connections, use the following command:
<*>, <OUT>, Memory location, <ENTER>
Ex: <*> <OUT> 5 <ENTER>
•
Restoring Connections
To restore connections from memory, use the following command:
<*>, <IN>, Memory location, <ENTER>
Ex: <*> <IN> 5 <ENTER>
Note: If the current switch configuration includes assigned Scan Mode dwell time values (page 9), to save the current
configuration be sure to assign a memory location to it. Otherwise, when the VEEMUX-A is powered OFF, all dwell
time values will be erased. Also, saving the configuration as memory location 0 will cause it to be the power-ON default
configuration.
Configurations that are saved into memory locations via
the keypad can be recalled via the web interface (page 20)
and vice versa.
