NTI MINI SERVER ENVIRONMENT MONITORING SYSTEM
26
WAP Login
The user can login to the ENVIROMUX-MINI through a WAP 2.0 compatible device (firmware version 1.34 or higher required) to
view a Summary Page for the sensor status (below). To login, type the current IP address of the ENVIROMUX-MINI into the
address bar of the WAP browser and add the word “mobile” (default IP address used in the example below):
Note: If the HTTP Server Port number is changed (page 16) from port 80 (default), then the port number will need to be
added to the IP address (i.e. if the port number is changed to 95, then the IP address would be
http://192.168.1.21:95/mobile)
A log in prompt requiring a username and password will appear:
Username = Administrator
(uppercase letter for "A" only)
Password = admin
(lower case letters only)
Note: usernames and passwords are case sensitive
Note: The user will not be required to login if the Guest account
is enabled (page 19).
Figure 24- WAP Login page
With a successful login, a screen similar to the following will appear. This is the only information that can be accessed through the
WAP 2.0 interface. Select “
Refresh
” to refresh the information on the display. Select “
Log out
” when you are finished viewing
the information.
Note: The display will refresh automatically based on the refresh rate set on the
“
General
”
page (page 15) in the field
“
Update Sensor Status Pages every...
”
(firmware version 1.35 or higher required)
Figure 25- WAP Summary page
http://192.168.1.21/mobile
