12
10. Program and Review Length of Time Alert Trigger Will Last
In programming mode, press <7> and input triggering time:
<1> = .5 seconds
<2> = 3 seconds
and then press <ENTER>. If entered correctly, the LED will display “A”, then return to programming mode (“5”).
Review Alert Trigger Duration
In programming mode, press <3> and <7>
The LED display will show the triggering time programmed (1 or 2), followed by two beeps.
Note: The default triggering time is 0.5s.
11. GSM Module Signal Strength Display
In normal operating mode (
not
programming mode), with the decimal point on the lower right corner flashing slowly, press <5> + <6> +
<ENTER> to switch ON the GSM module signal strength display.
The value will be 0-5, with 0 indicating the weakest (unable to send an alert) and 5 indicating the strongest signal.
12. Stop Alarm State on Dialer
While triggered, the E-AVDS-GSM will automatically send an alarm by dialing the numbers saved. If a user wants to stop it, enter the
password while the small “o” (upper segments of the LED display) is displayed. If the password is accepted, the password will then
be displayed, the alarm state will be discontinued, and two beeps will be heard. The E-AVDS-GSM will return to normal operating
mode.
If the user enters the wrong code, the dialer will remain in an alarm state.
13. Restore Factory Default Settings
In programming mode, press <8> + <9><1><1> + <ENTER>. The LED will display “A” if entered correctly and
and return to programming state (“5”).
Note:
Most of the settings can be restored to factory default, except for the voice message recorded and triggering method (Need
manually operation).
14. Extra Information
1. If a SIM card is not installed or the E-AVDS-GSM is faulty, the LED will display “E” after initialization and will not function.
2 Press <ENTER> to return to working state after finishing any programming operation. If <ENTER> is not pressed and the LED
continues to display “5” (programming mode), the dialer will not be able to acknowledge any alert triggers until it is returned to a
working state.
3. Do not use a SIM card with a PIN code protection feature. If the SIM card has this feature, insert the card in
another mobile phone to disable the function (for example: using a Nokia mobile phone, choose: Menu
→
setting
→
security setting
→
PIN protection
→
OFF).
Summary of Contents for E-AVDS-GSM
Page 7: ...7...
