REMOVING CAMERA
CAUTION!
After use in water, water will remain in gaps between housing, back cover and
Secure-Latch. Wipe any water off housing with a soft dry towel to prevent water from falling
on camera.
1. Pull Control Dial outward away from housing.
2. Press Lock Lever while pulling Secure-Latch away from housing main body. Open back
cover.
3. Tip Housing backwards, gently sliding camera out of housing.
HANDLING PRECAUTIONS
The Port Lens Flash Window and Monitor Window are manufactured using hard coat acrylic.
When cleaning use a clean soft cloth taking care not to scratch them.
INTERNAL AND EXTERNAL STROBE
※
For heavy strobes and lights please use optional Grip & Tray Assembly and compatible
connector.
※
Use the Strobe Mask-External Strobe Connection Mount to connect external strobe fiber
-optic cable or plug.
CAUTION!
Store Strobe Mask-External Strobe Connection Mount and Screw in a secure
place so as not to lose them.
1. Place the Strobe Mask-External Strobe Connection Mount over the Flash Window making
sure to insert the Strobe Mask Anchor in the Anchor Groove.
2. Using the Strobe Mask Screw, attach the secure the Strobe Mask by screwing it into the
Screw Socket provided.
3. Insert fiber-optic cable or plug into appropriate socket(s) provided.
※
Two (2) Tripod Sockets are provided at the bottom of the housing for use in attaching
Seatool/Recsea genuine tray and grip assemblies.
4.
Summary of Contents for Recsea CWOM-TG5
Page 11: ...MEMO ...
