background image

Asphalt and concrete cutters 

Operation manual 

page 

issued 

0

1/2017

 

5. Always  secure  the  machine  against  falling,

tipping or sliding during transport.

6. Machine  can  be  transported  only  in  upright

position with hand brake engaged.

1.2.  Prohibited activities

Never: 

use  the  machine  for  other  than  intended
purposes 

use  the  machine  in  other  way  than  as
described in the Operation Manual 

operate the machine drunk or intoxicated

operated  the  machine  if  its  operation
could cause harm to other people

start  and  operate  the  machine if there are
other people within the dangerous area

operate the machine if some safety device
(i.e. cover) is damaged or missing

operate the machine in areas with external
risks  (risk  of  soil  flow,  dangerous  fumes,
risk of explosion, risk of electrical shock,
etc.)

operate  the  machine  in  areas  where  its
operation may cause damage to buildings,
structures or utility lines

operate the machine within the protective
range  of  power  lines  or  transformer
stations

operate  the  machine  under  poor  visibility
or  at  night,  unless  the  jobsite  is
sufficiently illuminated

leave unprotected machine

disable 

or 

modify 

safety 

devices,

protective and safety systems

operate the machine with leaking oil, fuel
or other liquids

start  the  engine  in  other  way  than
described in the Operation Manual

clean a running machine

smoke or use naked flame when refueling

1.3.  Hygienic principles 

Oil  derivates  (fuel,  lubricants)  as  well as paints 
and  thinners  are  harmful  agents.  Anyone  who 
gets  into  contact  with  such  agents  is  obliged  to 
protect  himself  and  follow  general  principles 
health  protection  as  well  as  to  follow 
instructions valid for each specific agent. 
Pay special care to: 

skin care

wash  hands  properly  after  finishing  the
work and apply suitable cream

Store  the  fuels,  lubricants,  paints,  thinners, 
cleansing  and  conservation  agents,  as  well  as 
other  dangerous  agents  in  original  containers, 
properly  sealed.  Never  allow  storing  in 
unmarked  bottles  or  containers  or  even  in 
beverage bottles. Store such agents in safe place, 
out of reach of children. 
In  case  that  the  agent  gets  into  touch  with  skin 
or eyes, or when it is eaten or inhaled, apply the 
first aid and get immediately medical aid. 

1.4.  Environmental principles

Fuel, lubricants and other operational fluids are 
harmful  to  environment.  This  category  also 
includes part of the machine that get into contact 
with  operational  fluids,  such  as  filter  and 
hydraulic hoses. 
After use these belong to dangerous waste. 

Pay high attention to avoid leakage of the fluids 
and their escape into soil or water (including the 
sewage). 
Store  the  fluids  in  such  manner,  that  the  fluids 
gets caught in case of accidental leakage. 
If  these  agents  still  escape,  arrange  their  safe 
collection and liquidation. 

1.5.  Liquidation of the machine 

By  liquidation  of  the  machine  after  its  lifefime 
the  user  is  obliged  to  meet  the  requirements  of 
all  regulations  of  wastes  and  environmental 

protection. Engine oil has to be drained and used 
filters  have  to  be  removed  from  machine  for 
liquidation. 

Summary of Contents for RZ 122























Reviews: