Asphalt and concrete cutters
Operation manual
page 3
issued
0
1/2017
Congratulations! You have purchased an asphalt and concrete cutter NTC. You receive high-
quality and powerful machine, intended for professional use under the heaviest conditions.
Read carefully this operation manual before starting the machine and always keep the instruction -
this way you will secure safe operation, high working output and long durability of the machine.
The manufacturer bears no responsibility for damages arising from not keeping the operation
manual.
This machine was manufactured by NTC STAVEBNÍ TECHNIKA spol. s r.o.
Address:
Ji inková
120
552 03
Č
eská Skalice
Czech Republic
Phone: +420 491 452 184, fax: +420 491 401 609
E-mail: [email protected]
NTC STAVEBNÍ TECHNIKA spol. s r.o. is a light construction equipment manufacturer with a long-
term experience. NTC machines are exported to many European countries, among others to Spain,
Netherlands, Italy, Hungary, Romania and Russia.
NTC has certified quality control system according to ISO 9001:2009.
All manufactured models undergo testing, measuring and consideration of safety risks; all machines
conform to safety standards and bear the CE mark.
CONTENT:
1.
SAFETY INSTRUCTIONS ............................................................................................................................... 5
1.1.
G
ENERAL INSTRUCTIONS FOR OPERATION OF LIGHT CONSTRUCTION EQUIPMENT
.............................................. 5
1.1.1.
Requirements for qualification of the operator ....................................................................................... 5
1.1.2.
Contractor's obligations .......................................................................................................................... 5
1.1.3.
Operator's obligations ............................................................................................................................. 5
1.1.4.
Operation of the machine ........................................................................................................................ 5
1.1.5.
Maintenance and Service......................................................................................................................... 6
1.1.6.
Transport and Storage ............................................................................................................................. 6
1.2.
P
ROHIBITED ACTIVITIES
..................................................................................................................................... 7
1.3.
H
YGIENIC PRINCIPLES
........................................................................................................................................ 7
1.4.
E
NVIRONMENTAL PRINCIPLES
............................................................................................................................ 7
1.5.
L
IQUIDATION OF THE MACHINE
.......................................................................................................................... 7
1.6.
SAFETY INSTRUCTIONS…………………………………………………………………………………8
1.7.
H
YGIENIC DATA
................................................................................................................................................. 8
1.8.
LIST OF SAFETY DECALS………………………………………………………………………………….9
1.9.
DISPOSAL OF PACKAGING MATERIAL………………………………………………………………10
2.0
TECHNICAL DESCRIPTION…………………………………………………………………………….10
2.1.
B
ASIC
T
ECHNICAL
D
ATA
: ................................................................................................................................ 11
2.2.
L
UBRICANTS
................................................................................................................................................... 11
2.3.
I
DENTIFICATION
.............................................................................................................................................. 11
2.4.
E
NGINE
I
DENTIFICATION
.................................................................................................................................. 12
3.
PRIOR TO STARTING ................................................................................................................................... 12
3.1.
C
HECK
-
O
IL
L
EVEL
......................................................................................................................................... 12
3.2.
V
ISUAL
I
NSPECTION OF THE
M
ACHINE
............................................................................................................ 13
3.3.
A
DDING
F
UEL
.................................................................................................................................................. 13
3.4.
C
HECK
-
A
IR
F
ILTER
........................................................................................................................................ 13
3.5.
MACHINE
TIPPING
......................................................................................................................................... 13
