Vibratory tampers
Operation manual
page
5
issued 05/2014
At the designated types of machinery, vibratory rammer, type NT 59, NT 65 N,NT
68 and NT 70H in
accordance with the Act No. 22/1997 Coll. as amended, on technical requirements for products placed
stickers symbols safety signs, symbols and informative descriptions of the design and
implementation determine the technical norm.
In the following different types of labels represented in the design, they are placed on the appropriate
machine. For each individual symbol, and the sticker is attached text explaining its significance.
1.
Hazard warning sign, a symbol No.
B.3.1 (exclamation mark) before
operating the machine warns of
danger.
Information for operators on how to
proceed with the repair, cleaning or
adjusting
machines.
Label,
the
symbol No. B.2.5 commands guide
wear
while working with the
machine muffs to protect hearing
2.
7.25 No sticker marks according to
ISO 6405-1
(the symbol indicates hinging point, ie
the place at which the machine can be
lifted)
3.
Sticker „LAY THE VIBRATORY
TAMPER DOWN ON THE RIGHT
SIDE ONLY“
4.
Sticker containing information about
the type of fuel intended for the
engine machine
5.
Sticker indicating the data value of
the noise emission, which was for
machinery vibration tamper detected
by examination carried out under the
terms of GO No. 9 / 2002.
6.
Sticker indicating the need to tighten
the screws on the heel luck.
