9
Overview
Designed using NST second-generation DSP designs, the VMO16 brings no-compromise audio performance and system control
to Dante networked audio installations.
The VMO16 brings all the benefits and experience of our live sound filters and dynamics algorithms to an installation product.
The 16 inputs from the Dante network go to a full 16x16 matrix mixer allowing any of the Dante networked inputs to be routed
to any analogue output channel. All of the 16 analogue outputs have 16 bands of parametric EQ, 48dB/Oct high and low pass
filters, up to 1.3 seconds of delay as well as our high performance, two-stage PXL limiters for high performance loudspeaker
protection.
All analogue audio connections are on Phoenix-type 3-pin 5.08mm pitch connectors. The 4 GPI connections allow configurable
actions such as fire alarm mutes and preset recalls. Up to 30 presets can be stored with recall options allowing selective recall
combinations of input, matrix and output sections.
Our D-Net control software for PC, Mac and iPad gives you complete control over ethernet and wifi. The VMO16 is also fully
compatible with our VR1 PoE remote control panel for simple, flexible user control. Control via third party systems such as
Crestron™ is available via our simple ethernet control protocol.
Key Features
16 Dante Inputs
16 Analogue Outputs
Sample rate fixed at 96kHz
Routing Matrix Modes:
Mix Matrix, all Dante Inputs to all Analogue Outputs
Output Processing Features:
16 Parametric EQs
Crossover Filters up to 48dB/Oct
Dante Input Gain, Band Gain, Output Gain, Polarity,
Delay (up to 1.3s per channel)
2-stage PXL Limiter
Control Features:
Remote control via 100Mbps Ethernet
Up to 30 presets may be stored for offline recall
Compatible with VR1 PoE remote control panel
GPI muting for emergency evac systems programmable for either closed or open contact
GPI closed contact programmable memory recall (x4)
Simple Ethernet Control Protocol enables building control system integration for Crestron™ and other similar systems.
