11
Rear Panel Overview:
1. Mains Power Inlet, Fuse and Power Switch:
3-pin IEC input, fused, 100-250VAC, 50-60Hz <20W.
A spare fuse is located within the fuse holder – only replace with the correctly rated fuse specified in the Technical
Specifications
section.
2. Dante Ethernet Ports:
Dante RJ45 network Ethernet ports accept a standard CAT5 cable for connection to a network switch. The Dante ports are
configured as redundant by default, but can be configured in switched mode in the Dante Controller software.
3. Ethernet Computer Control Port:
RJ45 network Ethernet port accepts a standard CAT5 cable for connection to a computer (or suitable network switch to control
multiple units simultaneously).
4. ID LED:
Flashes (in tandem with all front panel meters) to identify the unit in a network when
the “ID” button is pressed in D-Net remote software on a unit’s control panel:
Continues…
1
2
3
4
6
5
