9
Overview
With inputs and outputs switchable in channel pairs between analogue or AES/EBU the ID48X gives you the flexibility you need
to integrate into your system.
Compressors are available on every input as well as a high pass filter, 8 bands of parametric EQ, 3 bands of dynamic EQ, a 28-
band graphic EQ, and up to 1.3 seconds of delay. Routing to outputs can be configured to either mix-matrix mode, free-routing
or several pre-configured routing options.
Flexible channel linking enables quick and easy configuration of common crossover setups or customised configurations as
required. Every output channel has high and low pass filters, 16 bands of parametric EQ, up to 1.3 seconds of delay as well as a
new limiter designed to offer the best driver protection with the lowest distortion.
The ID48X runs at a fixed sampling rate of 96kHz. Front panel meters show levels of all inputs and outputs (plus mute states)
and indication of remote control status is also provided.
The USB and Ethernet based computer control software gives you the ability to not only control all the devices on a network but
also to store preset memories and configure systems offline. With Mac and iPad control too, you can control your system the
way that suits you.
Key Features
4 Analogue Inputs, 8 Analogue Outputs
AES Digital Inputs and Outputs with sample rate conversion from 24kHz to 192kHz
Sample rate fixed at 96kHz.
Input Processing Features:
Soft Knee Compressor
8 Parametric EQs
24dB/Oct HPF
3 bands of Dynamic EQ
28-band Graphic EQ
Gain, Polarity, Delay
Routing Matrix Modes:
Mix Matrix, Routing Matrix, Preset Configurations (2x4, 4x2, 1x8, 2x3+2)
Output Processing Features:
16 Parametric EQs
Crossover Filters up to 48dB/Oct
FIR Filter capable -
1024 Taps/2ch, 512 Taps/4ch, 256 Taps/8ch at 96kHz
Gain, Polarity, Delay, Limiter
Control Features:
Remote control via Gbps/100Mbps Ethernet, USB Type C
Up to 30 presets may be stored for offline recall
