10
Unit Overview
Front Panel Overview:
1. Input Meters:
Real time LED input meters show level from maximum input level (clip) in 4-segments...
Signal present, 6dB below clipping, 0dB/maximum input level and clip.
If analogue input level is within 1dB of clipping, the red input Clip LED will illuminate to show this.
2. Output Meters, with Mute Indication:
Real time LED output meters show level from the limiter threshold in 4-segments...
Signal present, 6dB below limiter threshold, Limiter threshold and 3dB into limiting.
Note: The red l3 LED will also illuminate if this output is muted.
3. Comms LEDs:
Flashes when communication is taking place between the device and D-Net software on either Ethernet port (green for 1Gbps
or orange for 100Mbps) or via the USB port (green).
4. Power LED:
Illuminates when a suitable power source is connected and the unit is powered on.
5. USB Port:
USB type C port for single unit connection to a computer running the D-Net software. This will also allow remote control of
other NST devices if they are connected via the Ethernet ports on the rear panel.
