4
Blackout
The first tap of the Blackout button will cause all patterns to reset and fade out at the
set fade rate. A second tap will reset the Manual scene
under the normal console
configuration.
Pressing and holding down the Blackout will bypass the set fade rate and cause the
patterns or scenes to go to blackout instantly.
Tap Sync
The Tap sync button is used to set and synchronize the chase rate by tapping the
button twice. The chase rate will synchronize to the time of the last two taps. The LED
above the Tap Sync button will flash at the new chase rate.
Tap Sync will override any previous setting of the chase rate control slider until the
slider is moved again.
Audio
Audio effects may be activated by tapping the Audio button until the LED above it lights
and then setting the audio sensitivity control for the desired effectiveness. Tapping the
Audio button again will extinguish the LED and turn off audio effects.
Glide
The Glide button is used to turn on and off the Glide mode
Any pattern selected after the Glide mode is turned on will fade or "glide" between
chase steps instead of instantly changing between steps. The Glide mode is activated
by pressing the Glide button and the Glide LED is lit. The Glide mode is turned off by
again pressing the Glide button. Turning off the Glide mode will not affect the patterns
selected while the Glide mode was on.
Program
The Program button is used to program chase patterns or static scenes into the pattern
memory or to program audio intensity effects. For programming details see the section
under "PROGRAMMING".
