background image

 

10

NSI CORPORATION LIMITED WARRANTY 

 

 
NSI Corporation warrants new electronics products to be free from defective materials 
and workmanship for a period of one (1) year from the date of purchase to the original 
owner when purchased from an authorized NSI dealer. 
 
The purchaser is responsible for completing and mailing to NSI, within 15 days of 
purchase, the warranty registration card enclosed with each product.  NSI products that 
have been subject to accident, alteration, abuse, or defacing of the serial number are 
not covered by this warranty.  The normal wear and tear of items such as knobs, jacks, 
and switches are not covered under this warranty. 
 
If your NSI product requires service during the warranty period, NSI will repair or 
replace, at its option, defective materials provided you have identified yourself as the 
original owner of the product to NSI or any authorized NSI dealer.  Transportation 
charges to and from an authorized dealer or the NSI factory for repair shall be the 
responsibility of the owner.  All products returned to NSI must have factory 
authorization for return prior to shipping. 
 
NSI Corporation is not liable for any incidental or consequential damages resulting from 
defect or failure other than repairs of the NSI product subject to the terms of this 
warranty.  This warranty gives you specific legal rights and you may have other rights 
which vary from state to state.  This warranty is expressly in lieu of all other agreements 
and warranties expressed or implied except as may be otherwise required by law. 

Summary of Contents for NCM 1600












Reviews: